We will be closed from May 9 - May 18
|
US and Canada 800-640-9792 |
|
International 469-952-2527 |
|
|
| Hours: Monday - Friday. from 8am to 4:00pm Central |
|
We will be closed from May 9 - May 18 |
MSR905H Magnetic stripe card reader/writer
.JPG)
Introduction
The MSR905H Manual Swipe Magnetic Card Reader/Writer is ideal
for access control, time keeping, banking, ID recognition &credit verification and related
application. In fact, wherever a magnetic stripe ID or transaction card is used, one can find a
related use for the versatile, user-friendly MSR905H reader/writer.
The MSR905H is designed to offer a reading and writing solution of high and/or low
coercivity cards that will attractively complement an existing system.
MSR905H box contains the following accessories:
1. Switch power Supply, AC 110~240V in/DC 24V, 2.5A out.
2. Power cord.
3. Signal cable (USB2.0).
4. Utility disk (A/P S/W).
5. Blank Hi-Co test card (or and Low-Co test card).
6. Programmer's manual.
General Description
The MSR905H series is designed to read and/or write high or low coercivity magnetic cards. It
can encode and verify up to 3 tracks of data simultaneously. It communicates with a host computer
or other terminal using a standard USB2.0 interface.
| Specification | |
| Electrical | |
| Power requirements | +24VDC +/- 5% |
| Consumption | Typical 350mA Max. 600mA plus for each writing track |
| Power supply | External switching power 24V/2.5A |
| Communication | Standard USB cable |
| Ripple | 50mVp-p or less |
| Dielectric strength | 500 VDC for 1 minute |
| Performance | |||
| Read card | Track1 | Track2 | Track3 |
| Bit per density | 210 bpi | 75/210bpi | 210 bpi |
| Coercive force | Read/write 300-4000 oe Mag.card | ||
| Card thickness | 0.76-1.2mm | ||
| Read speed | STD card | Jitter +/-15% | Amp. 60% |
| 5-55ips | 5-50ips | 5-50ips | |
| Write speed | 5-30ips | ||
| Write jitter | Interval < +/- 10%, Sub-interval < +/- 12% | ||
| Error rate | Read < 0.5% | ||
| Write < 0.8% | |||
| Head life | Min. 1000K swipes for both read/write head | ||
| Performance | |||
| Read card | Track1 | Track2 | Track3 |
| Bit per density | 210 bpi | 75/210bpi | 210 bpi |
| Coercive force | Read/write 300-4000 oe Mag.card | ||
| Card thickness | 0.76-1.2mm | ||
| Read speed | STD card | Jitter +/-15% | Amp. 60% |
| 5-55ips | 5-50ips | 5-50ips | |
| Write speed | 5-30ips | ||
| Write jitter | Interval < +/- 10%, Sub-interval < +/- 12% | ||
| Error rate | Read < 0.5% | ||
| Write < 0.8% | |||
| Head life | Min. 1000K swipes for both read/write head | ||
| Environments | |
| Operation | -10 to 55oC, 10 to 85% humidity |
| Storage | -30 to 70oC, 10 to 90% humidity |
| Safety Approval | |
| Rating | FCC Class B, CE ClassB, UL, cUL |
All specifications subject to change without notice
These units are designed to write and verify magnetic strip data and do not eliminate the need for read only units. All sales on encoder products are final. DOA's will be repaired or replaced. The 1 year manufacturer warranty is in effect from date of purchase.