MSR 106 Series Reader

Manual Swipe Magnetic Card Reader/Writer MSR106 Series is designed to offer a card reading/writing solution for ISO 7811-6 and 8484 formats. It reads and writes up to 3 tracks of data, e.g. decoding/encoding and verifying up to 3 tracks of data simultaneously. Also, MSR106 Reader/Writer provides a standard RS-232 interface to communicate with host system or other terminal computers.

Major features of Manual Swipe Magnetic Card Reader/Writer MSR106 Series are:

Reading/writing magnetic stripe cards complied with ISO 7811 format

Reading/Writing magnetic stripe Passbook complied with ISO 8484 format

Manual Swipe to read and/or write cards with PC standard RS-232 interface

Reading low or high coercive force of magnetic stripe (300~4000Oe)

Writing low coercive force of magnetic stripe (300~600Oe)

5~35ips operational swipe speed of writing data

5~55ips operational swipe speed of reading data

+9VDC+/-10%, 750mA Min., external power adapter attached

Writing and verifying data on single, dual, or triple track within one swipe

Programming software attached for various read/write performance

Program software for DOS and Windows 98/Me

Programmable leading bit, raw data, and user defined format

Good size with dimensions of 200(L) x 60(W) x 56(H) mm

CE, FCC, UL, cUL certified

Manual Swipe Magnetic Card Low-Co Reader/Writer
MSR 106 Series Data Sheet

Electrical
Power requirements	+9VDC +/-10%
Consumption	Typical 60mA Max.and 100mA plus for each writing track
Power supply	External power adapter 9V/1.0A
Communication	Standard RS232 signal level
Ripple	50mVp-p or less
Dielectric strength	500 VDC for 1 minute
Mechanical
Body material	PC P4V-0
Weight	Approx. 1kg
Dimension	200.4Lx60.4Wx55.7Hmm
Swipe	Manual, single direction
Environments
Operation	-10 to 55^oC, 10 to 85% humidity
Storage	-30 to 70^oC, 10 to 90% humidity
Safety Approvals
Rating	FCC Class B CE Class B, UL, cUL
Performance
Read card	Track1	Track2	Track3
Bit per density	210 bpi	75/210bpi	210 bpi
	Read/Write Track2 at 210 bpi for Pass Book
Coercive force	Read 300-4000 Oe Mag. card
	Write 300-600 Oe Mag. card
Card thickness	0.76-1.2mm
Read speed	STD card	Jitter +/-15%	Amp. 60%
	5-55ips	5-50ips	5-50ips
Write speed	5-35ips
Write jitter	Interval<+/-8%, Sub-interval<+/-10%
Error rate	Read < 0.5%
	Write<0.8%
Head life	Min. 500K swipes for both read/write head

All specifications subject to change without notice

These units are designed to write and verify magnetic strip data and do not eliminate the need for read only units. All sales on encoder products are final. DOA's will be repaired or replaced. The 1 year manufacturer warranty is in effect from date of purchase.