MSR206 Manual Swipe Magnetic Card Reader/Writer is designed to offer a card reading/writing solution for ISO 7811/1~6 formats. It reads and writes up to 3 tracks of data, e.g. decoding/encoding and verifying up to 3 tracks of data simultaneously. Also, MSR206 Reader/Writer provides a standard RS-232 or USB interface to communicate with host system or other terminal computers.

MSR206 Key features of Manual Swipe Magnetic Card Reader/Writer are:

Reading/Writing magnetic stripe card complied with ISO 7811/1~6 formats

Manual Swipe to read and/or write card with RS-232 or USB output

Read/Write High and Low Coercive force of magnetic stripe (300~4000Oe)

5~35ips operational swipe speed of writing data

5~55ips operational swipe speed of reading data

+24VDC+/-10%, 2.0A Max., external power adapter attached

Writing and then verifying data on single, dual, or triple track in one swipe

Programming software for various read/write performance

High/Low Coercivity encoding circuitry selectable on screen

Programmable leading bit, raw data, DMV/AAMVA, and user defined format

Good size with dimensions of 210(L) x 60(W) x 65(H) mm

CE, FCC, UL, cUL certified

Manual Swipe Magnetic Card Reader/Writer MSR206 Series is ideal for credit card verification and various card related applications. Customer designed products are available for optional projects or joint ventures.

Manual Swipe Magnetic Card Hi-Co Reader/Writer
Data Sheet

Electrical
Power requirements	+24VDC+/-5%
Consumption	Typical 350mA Max. 600mA plus for each writing track
Power supply	External switching power 24V/2.2A
Communication	Standard RS232 signal level
Ripple	50mVp-p or less
Dielectric strength	500 VDC for 1 minute
Mechanical
Body material	ABS 94V-0
Weight	Approx. 1.5kg
Dimension	210.1Lx65Wx60H mm
Swipe	Manual, single direction
Environments
Operation	-10 to 55^oC, 10 to 85% humidity
Storage	-30 to 70^oC, 10 to 90% humidity
Safety Approvals
Rating	FCC Class B, CE ClassB, UL, cUL
Performance
Read card	Track1	Track2	Track3
Bit per density	210 bpi	75/210bpi	210 bpi
Coercive force	Read/write 300-4000 oe Mag.card
Card thickness	0.76-1.2mm
Read speed	STD card	Jitter +/-15%	Amp. 60%
	5-55ips	5-50ips	5-50ips
Write speed	5-30ips
Write jitter	Interval<+/-10%, Sub-interval<+/-12%
Error rate	Read < 0.5%
	Write<0.8%
Head life	Min. 1000K swipes for both read/write head

All specifications subject to change without notice

These units are designed to write and verify magnetic strip data and do not eliminate the need for read only units. All sales on encoder products are final. DOA's will be repaired or replaced. The 1 year manufacturer warranty is in effect from date of purchase.